Cimaise
Coverage

Pair and set clause: protecting the value of a group of works

·9 min read·The Cimaise team
Two birds depicted as pendants — the image of a pair whose value lies in the complete set

A pair of Sèvres vases, a triptych, a suite of six numbered prints, a matching drawing-room suite: on the art market, a set is almost always worth more than its parts taken separately. Break just one of the two vases and the survivor is no longer worth half the pair — it is worth far less, sometimes a negligible fraction, because it was the complete set that made it rare. Most insurance policies pay for the damaged object and stop there. The pair and set clause exists precisely to make good this invisible loss: the drop in value suffered by the pieces that remain.

Why a set is worth more than the sum of its parts

The market pays a premium for completeness. An intact set bears witness to careful provenance, continuous conservation and an aesthetic coherence that time makes ever rarer. Split it up, damage part of it, and that premium evaporates.

Several categories of works are concerned:

  • Pairs: vases, candelabra, armchairs, drawings conceived as pendants, portraits of a married couple painted together.
  • Series and suites: a cycle of numbered prints, a photographic series, a religious polyptych, a set of tapestry cartoons.
  • Furniture sets: a complete drawing-room suite, a porcelain service, a matching chimney garniture.
  • Editions: sculptures or prints produced in limited numbers, where the coherence of the edition matters.

In all these cases, value is not shared out equally between the objects. Take an illustrative example: a pair of vases valued at €100,000 does not break down into two vases at €50,000 each. Once its twin is destroyed, the single vase may be worth only €20,000 to €30,000 on the market, because buyers are looking for the pair. The difference — here €20,000 to €30,000 — is a very real loss, yet it appears on no restoration invoice. This is exactly the gap the pair and set clause is designed to fill.

What the pair and set clause actually covers

The clause starts from a simple observation: when one element of an insured set is destroyed, stolen or seriously damaged, the insurer should not only repair or replace that element, but must also take account of the depreciation suffered by the rest of the set.

In practice, it rests on an indemnity principle that recognises the value of the set as a whole. Depending on the policy, two approaches coexist:

  1. Indemnity for the damaged piece + depreciation of the rest. The insurer pays for the lost piece or covers its restoration, then pays in addition the loss in value established on the surviving pieces. The collector keeps what remains but receives enough to offset its fall in value.
  2. Total loss option (abandonment). Some policies allow the policyholder, in the event of a loss affecting one element, to hand over all the remaining pieces to the insurer and receive the agreed value of the complete set. The claim is then treated as if it had struck the whole — the preferred solution when a lone survivor has no real interest left.

The choice between these two routes depends on the nature of the set and how it is described in the policy. For a decorative pair, the second option is often the most protective; for a long series where the loss of one print does not destroy the whole, the first is generally sufficient. This mechanism only makes sense if it rests on an all risks policy on an agreed value basis, where the value of the set has been fixed by mutual agreement before any loss — we come back to this below.

Two ways to indemnify: a comparison

The table below summarises the two approaches. The figures are given purely as an illustrative example and imply no pricing: each policy sets its own terms.

CriterionPartial indemnity + depreciationTotal loss option
What the policyholder receivesValue of the damaged piece + loss in value of the restAgreed value of the complete set
What the policyholder keepsThe surviving piecesNothing (the rest is handed to the insurer)
Suited toLong series, sets that remain coherent despite losing one elementPairs, sets where a lone survivor loses all interest
Point to watchQuantify the depreciation properly through an appraisalCheck that the option is written into the policy
Illustrative examplePair at €100,000: broken vase indemnified + €25,000 depreciation on the survivorPair at €100,000: the policyholder hands over the remaining vase and receives €100,000

What sets a good policy apart is not merely the presence of the clause, but how clearly it specifies which of these two approaches applies and how the depreciation is measured. A policy that stays vague on this point turns the claim settlement into a negotiation — exactly what a collector wants to avoid.

The conditions that make (or break) the cover

A pair and set clause only takes effect if the set has been properly described and valued beforehand. Three settings are decisive.

The description in the policy. The set must be identified as such in the schedule of values ("pair of vases", "suite of six prints"), not as scattered objects added together. It is this description that triggers the clause. A collection listed piece by piece, with no mention that the items belong to a set, risks giving entitlement only to compensation for the object affected. The agreed value of the set. Depreciation can only be calculated against a stable reference value. Fixing an agreed value for the complete set — on the basis of a recent appraisal — prevents the insurer from disputing the completeness premium after the event. For the logic of agreed value and how it differs from market value, our dedicated article on agreed value versus market value sets out what is at stake. Appraisal and documentation. Photographs of the complete set, purchase invoices, certificates, edition or numbering details: this file is what will make it possible, when the time comes, to quantify the loss in value of the survivors. Without it, depreciation remains an unverifiable assertion. Collectors who build coherent sets have every interest in documenting that coherence from the moment of acquisition — a habit we encourage among the art collectors we work with.

Pair and set or depreciation after restoration: not the same thing

Two neighbouring clauses deal with loss of value, but they address different situations.

The depreciation after restoration clause concerns a single object: a work that has been damaged and then restored may, despite careful repair, retain a lasting loss in value — a relined canvas or a glued porcelain piece never quite recovers its original market value. The clause compensates for this residual loss specific to the restored piece. We cover this subject in detail in our guide to the depreciation of a work after restoration.

The pair and set clause, by contrast, is not about the damaged object but about the knock-on effect on the others. The broken vase may be beyond repair or perfectly restored: in both cases, it is the value of the intact vase that collapses because the pair has been broken.

The two clauses often apply together. Back to our pair of vases: if one is broken and then restored, the policyholder may be entitled to claim both the depreciation of the restored piece (under the first clause) and the depreciation of the intact vase (under the second). A well-constructed policy dovetails these covers without letting them overlap or cancel each other out.

How to insure a set properly: the approach

Protecting a set is not something to improvise at the time of a loss. The process comes down to five steps:

  1. Identify the sets within the collection: pinpoint what forms a pair, series, suite or garniture, rather than treating everything as isolated units.
  2. Have the set appraised as a whole, asking the appraiser to value the completeness premium and to estimate what each element would be worth on its own.
  3. List each set at an agreed value in the policy, with an explicit description ("pair", "suite of N pieces").
  4. Check that the pair and set clause is present and what it covers: does it cover depreciation of the rest? Is the total loss option provided for? How is the loss in value measured?
  5. Update after each acquisition that completes a set, or each sale that splits one, so that the insured value keeps pace with the reality of the collection.

This approach overlaps with the broader effort to avoid undervaluing a collection; our advice on underinsurance and revaluation usefully extends it. A poorly described set is doubly exposed: underinsured on its overall value, and deprived of the benefit of the clause because it was never described as a set. Having the schedule of values reviewed by a specialist broker before signing avoids both pitfalls. If you own pairs, series or sets, a simple fine art insurance quote lets you check, set by set, that the clause really works in your favour.

FAQ

What is the pair and set clause in art insurance?

It is a cover that takes into account the loss in value suffered by the remaining elements of a set when one piece is destroyed, stolen or damaged. It compensates not only for the damaged object but also for the fall in value of the pieces that survive.

Why is a single object worth less than its share of the pair?

Because the market pays a premium for the completeness and rarity of an intact set. Once the pair is broken, the remaining object loses the appeal of the set: it is therefore not worth half the pair, but often a much smaller fraction.

Does the clause apply to series of prints or photographs?

Yes, provided the series is described as a set in the policy. The loss of one print from a numbered suite can depreciate the whole; the clause allows this to be taken into account, on terms that vary from one policy to another.

Can I be compensated for the complete set and give up the survivors?

Some policies provide for a so-called total loss option: you hand the remaining pieces over to the insurer and receive the agreed value of the complete set. This option must be expressly stated in the policy for it to be exercised.

Do I need an agreed value to benefit from the clause?

It is not always mandatory, but it is strongly recommended. An agreed value fixed for the set before any loss serves as the reference for calculating depreciation and avoids a dispute over the completeness premium at the time of settlement.

Are the pair and set clause and depreciation after restoration the same thing?

No. Depreciation after restoration concerns the loss in value of a repaired object. The pair and set clause concerns the loss in value of the other elements of a set. Both can apply to the same claim.

Have your collection's value agreed up front.