Cimaise
Coverage

Depreciation of a work of art after restoration or a loss

·8 min read·The Cimaise team
Old Master painting — a restored work regains its appearance but rarely its full market value

A painting falls, the canvas tears, a conservator steps in: a few weeks later, the work is back on the wall, the tear invisible to the naked eye. The matter seems closed. It is not. On the market, a piece that has been damaged and then restored is no longer worth what it was worth intact — sometimes 10% less, sometimes 40% less, depending on the artist, the nature of the damage and the quality of the work done. This loss cannot be seen on the wall; it appears on the day you try to sell. The question that decides everything is therefore not "has the work been repaired?", but "who pays for the value it has permanently lost?".

Restoring is not restoring value

The art market distinguishes two things that everyday language confuses: the physical condition of a work and its market value. Competent restoration re-establishes the first. It almost never fully restores the second.

The reason is simple: an informed buyer pays not only for what they see, but also for the object's history. A work that has suffered a major accident — a tear, a burn, immersion, a structural impact — now carries a trace in its condition report and in future appraisal reports. That trace weighs on the price, even when the intervention is flawless. This is known as depreciation or residual loss in value: the difference between what the work was worth before the loss and what it is worth afterwards, once restored.

The extent of this discount depends on several factors: the proportion of original material preserved, the visibility and location of the damage (retouching in a sky is more easily forgiven than retouching on a face), the artist's reputation and the sensitivity of their market, and finally the reversibility of the restoration. Two works repaired in exactly the same way may lose 5% and 35% of their market value respectively. This is precisely what most policyholders discover too late: their policy reimburses the cost of restoration, but ignores the loss in value that remains afterwards.

Partial loss, total loss: two logics of compensation

In fine art insurance, everything turns on one boundary: is the loss total or partial?

  • Total loss: the work is destroyed, stolen with no hope of recovery, or damaged beyond repair. Compensation then covers the full insured value. Under an all risks agreed value policy, this amount was fixed by mutual agreement before the loss and is not reopened — that is the whole point of the mechanism.
  • Partial loss: the work is damaged but can be restored. Here, the insurer does not pay the full value: it covers putting the work back into condition. And it is within the scope of this "putting back into condition" that the real question lies.

A basic policy only reimburses restoration costs. A good policy reimburses restoration plus the residual depreciation. The distinction looks technical; on a major piece, it represents considerable sums. Take a purely illustrative example: a work insured for €200,000 is damaged; restoration costs €15,000 and, once repaired, it would only sell for around €150,000. The restoration cost covers €15,000. But the loss in value — €50,000 — remains at the owner's expense if the policy does not include dedicated cover.

Loss in value cover: what it changes

High-end specialist policies include a loss in value clause (sometimes called a depreciation clause, *dépréciation* in French). Its principle: after restoration, an appraiser compares the value of the work before the loss with its restored value; the difference is paid in addition to the restoration costs. The table below illustrates the gap between three levels of cover, on the same case (figures given as an illustrative example).

ItemBasic policyStandard policyPolicy with loss in value cover
Restoration costsYesYesYes
Residual loss in valueNoPartial / cappedYes, up to the agreed value
Abandonment optionNoRareCommon
Amount left to pay (€200,000 example)≈ €50,000Variable≈ €0

The right-hand column changes the very nature of the protection: the owner is no longer simply reimbursed for the conservator's invoice, but put back in the financial position they were in before the accident. For a collector whose wealth rests on their works, this clause is not a contractual refinement: it is what separates insurance that protects the object from insurance that genuinely protects the value.

How depreciation is quantified

Depreciation is not decreed; it is appraised. After a partial loss, the process generally follows four stages:

  1. Assessment and condition report: an appraiser documents the damage precisely, before any intervention, with photographs and measurements. This document is the basis for everything that follows.
  2. Restoration by a qualified professional, whose report details the work carried out, the proportion of original material preserved and the reversibility of the retouching.
  3. Revaluation after restoration: a market appraiser estimates the value of the restored work, taking into account the discount the market will now apply.
  4. Calculation of the loss: depreciation is the difference between the pre-loss value (ideally the agreed value) and this restored value.

This is where the quality of your original file becomes decisive. Without a prior appraisal documenting the value of the work, the "before" value is open to discussion, and depreciation is negotiated to your disadvantage. An agreed value policy removes this uncertainty in advance: the starting point of the calculation is locked in, and only the value after restoration remains to be established. The difference between agreed value and market value comes into its own here, because it determines the basis on which your loss will be calculated.

The abandonment option: handing over rather than keeping a devalued work

Some policies offer a valuable alternative: the abandonment option. When depreciation exceeds a certain threshold, the owner can choose to abandon the work to the insurer and receive the full agreed value, as in a total loss. The insurer, now the owner, then takes charge of restoring and reselling the piece.

This option addresses a situation that is delicate both emotionally and financially: that of the collector who, after a serious accident, prefers to part with a piece that is now "marked" rather than live with a restored work they no longer look at in the same way. Not all policies offer it, and it is triggered only under strict conditions (depreciation threshold, the appraiser's agreement). This is a point to check explicitly before signing, not to discover at the time of a loss. The reporting procedure around it is the same as for any damage: our guide on making a claim for a work of art sets out the essential steps.

What you can do before any loss

Depreciation is prepared for long before the accident. A few habits significantly reduce your exposure:

  • Have each important work appraised and documented: value, provenance, initial condition, high-definition photographs. This is your "before" reference.
  • Opt for agreed value work by work, so that the starting point of the depreciation calculation cannot be disputed.
  • Check explicitly that your policy includes loss in value cover, and any limit or deductible attached to it.
  • Check whether there is an abandonment option — or not — and its trigger threshold.
  • Choose recognised conservators: high-quality restoration limits the discount and makes later resale easier.

These checks take no more than a careful reading of the policy schedule. If your current policy only reimburses restoration costs, it leaves a major gap in your protection. A fine art insurance quote from a specialist broker lets you compare, line by line, how each policy treats loss in value — the real point of divergence between two policies that, on paper, look equivalent.

FAQ

Does insurance reimburse the loss in value after restoration?

It depends on the policy. A basic policy only reimburses restoration costs. Only policies that include "loss in value" (or depreciation) cover compensate for the discount that remains after repair, in addition to the cost of restoration.

What is the depreciation of a work of art?

It is the lasting fall in market value of a work that has been damaged and then restored. Even perfectly repaired, a piece that has suffered major damage sells for less than an intact one: this difference is depreciation, or residual loss in value.

How is the loss in value calculated after a loss?

An appraiser compares the value of the work before the loss — ideally the agreed value stated in the policy — with its estimated value after restoration. The difference is the compensable loss, subject to any limits and deductibles provided for.

What is the abandonment option?

It is the right, offered by some policies, to abandon the work to the insurer above a certain depreciation threshold and receive the full agreed value, as for a total loss. The insurer then becomes the owner and handles the restoration and resale.

Does a minor restoration always lead to a discount?

No. A minor, well-executed intervention on a less sensitive area may have no measurable effect on market value. The discount becomes significant for structural or visible damage, damage to essential parts of the work, and for artists whose market is demanding about condition.

Do I need an agreed value to be compensated for depreciation?

It is not strictly mandatory, but it is strongly recommended. The agreed value sets the "before loss" value in advance and prevents it from being disputed when the loss is calculated. Without it, the very basis of the depreciation calculation becomes a matter for negotiation.

Have your collection's value agreed up front.